STL - TDC Hopup unit for KWA Vector

NOTE: The price is intentionally extremely high as to discourage purchasing this product. If you purchase this item at this price, you will receive the STL and nothing else. It does not come with a motorcycle and is not covered in gold. 

This STL is currently in Beta status and is by request only. Final product may or may not become available for STL/3D Printing, depending on Beta Testing feedback. 

The TDC Hopup for the KWA Vector is also VSR compatible. This unit was designed with the open window VSR barrel out of a stock Tokyo Marui HiCapa.

Due to this being an STL, the strength of the Hopup unit depends entirely on the print quality and material choice. If you are to print this product, please choose to print it with the best material possible (ABS/Nylon is suggested) and with the lowest layer height (0.1 at least) with 100% infill. Adding Threaded Inserts for the TDC and barrel mounts would drastically increase the durability of this product.

Modification to the print may be required for proper fitment. Any modifications needed that are outside of typical sanding, please contact us with details. Adjustments will be made for V2.

Instructions:

-This Hopup is designed to be a "slip on" hopup that will lock into place once properly aligned.

-Attach the bucking to the barrel and slide the hopup along the front of the barrel to the bucking.

-Once in place, screw in the required grub screws into the sides and top.

-Place the completed barrel and hopup into the outer barrel and tighten down the outer barrel screws.

Not for resale, do not distribute.